Key Points of Tricure AD Pellets
- 75% active ingredient – TriCure AD™.
- Apply curative level of TriCure AD to drought stressed turf.
- Cost effective and easy to apply.
- Non phytotoxic.
Product Specification
| Application Rate | 5 - 10 L/ha |
|---|---|
| Supplementary irrigation | Recommended |
| Pack size | 3 x 225g pellets |
The rate at which TriCure AD Pellets dissolve is determined by
- Water pressure
- Flow rate
- Water temperature.
To ensure correct dosage, carry out a calibration by recording the time taken for one pellet to fully dissolve.
Use the table below to determine the correct dosage per 100m2:
| Use | Application times per 100m2 | |
|---|---|---|
| Time taken for 1 pellet to dissolve fully | For FULL RATE APPLICATION (10 L/ha), apply for: | For LOW RATE APPLICATION (5 L/ha), apply for: |
| 6 minutes | 3 minutes 20 seconds | 1 minutes 40 seconds |
| 8 minutes | 4 minutes 27 seconds | 2 minutes 13 seconds |
| 10 minutes | 5 minutes 33 seconds | 2 minutes 47 seconds |
Supplement with further irrigation to ensure optimum penetration throughout the rootzone.
- Full rate (10 L/ha) will provide activity for up to 4 weeks.
- Low rate (5 L/ha) will provide activity for around 2 weeks.
- Please note: Longevity of activity is dependent on soil type and climatic conditions.
For further Nutrient Inputs, please follow this link
Usage Period
| Usage Period | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
Application Notes
For best results, use of TriCure Pellets should begin when daytime ambient temperatures reach 10-15°C (normally in early spring) or when the first signs of heat stress appear on turf.
Pellets can be used with most Hose-end Applicators available through Headland Amenity and will fit a 1" hose, or a 3/4" hose using an adapter. Nozzle type can be modified for variable spray patterns, but this may affect flow and dissolution rates.
The rate at which TriCure AD Pellets dissolve is determined by
- Water pressure
- Flow rate
- Water temperature.
To ensure correct dosage, carry out a calibration by recording the time taken for one pellet to fully dissolve.
Use the table below to determine the correct dosage per 100m2:
| Use | Application times per 100m2 | |
|---|---|---|
| Time taken for 1 pellet to dissolve fully | For FULL RATE APPLICATION (10 L/ha), apply for: | For LOW RATE APPLICATION (5 L/ha), apply for: |
| 6 minutes | 3 minutes 20 seconds | 1 minutes 40 seconds |
| 8 minutes | 4 minutes 27 seconds | 2 minutes 13 seconds |
| 10 minutes | 5 minutes 33 seconds | 2 minutes 47 seconds |
Supplement with further irrigation to ensure optimum penetration throughout the rootzone.
- Full rate (10 L/ha) will provide activity for up to 4 weeks.
- Low rate (5 L/ha) will provide activity for around 2 weeks.
- Please note: Longevity of activity is dependent on soil type and climatic conditions.